We accept Visa and MasterCard
Pay by Direct Credit (NZ only)

Products List


Home » Rifle Stuff + » AR-15


AR-15 - Proper Care, Cleaning & Feeding


  • Increase Accuracy & Reliability through Proper Cleaning & Maintenance
  • Confirm Basic Techniques and Lean Advanced Ones
  • Presented by Master  AR-15 Armorer Jim VanMiddlesworth
  • 130 minutes
List Price: $39.95
Price: $29.95
26.96 AUD
Add to cart

AR-15 / M16 Barrel Nut Wrench


  • Heavy Duty Wrench
  • Use with 3/8" or 1/2" Drive Bar or  Socket Wrench  for Leverage
  • Cut From 3/8" Thick Steel, Wont Flex Under Pressure
  • Made by Precision Reflex Inc.
  • Made in USA
List Price: $56.95
Price: $49.95
44.96 AUD
Out of Stock

AR-15 / M16 Sight Wrench - A1


  • Sight Wrench Tool for AR-15 / M16  Model A1
  • Large End has 5 Pins
  • Small End has 5 Pins
  • Made for Brownells USA
List Price: $29.95
Price: $19.95
17.96 AUD
Add to cart

AR-15 / M16 Sight Wrench - A2


  • Sight Wrench Tool for AR-15 / M16  Model A2
  • Large End Has 5 Pins
  • Small End has 4 Pins
  • Made for Brownells USA
List Price: $29.95
Price: $23.95
21.56 AUD
Add to cart

AR-15 Accu-Wedge


  • Eliminates 'slop' Between Receivers
  • Gives Solid Feel and Improves Accuracy
  • Buffers Cycling System to Reduce Wear
  • No modifications Needed
  • Suitable for all 'A Cat' AR-15 Platforms
  • Made for Brownells USA
List Price: $16.95
Price: $12.95
11.66 AUD
Add to cart

AR-15 Lower Receiver Vise Block (Brownells)


  • Heavy Duty Block Allows Firm Clamping in Vise
  • Reduces Risk of Danamaging Firearm
  • Effective for Cleaning, Assembly & Repair
Learn how to use this product at the following link - www.brownells.com/.aspx/lid=11498/guntechdetail/
List Price: $129.95
Price: $89.95
80.96 AUD
Out of Stock

AR-15 Sight Wrench


  • Brownells AR-15 Sight Wrench
  • Fits A1 & A2 Models (4 & 5 prongs)
  • Part # 078-000-010
List Price: $44.95
Price: $49.95
44.96 AUD
Add to cart

AR-15/M16 Barrel Extension Torque Tool


  • AR15/M16 Barrel Extension Torque Tool
  • Applies Straight-Line Torque for Easy Barrel Nut Installation
  • Does Not Scratch Exterior of Upper Receiver
  • Helps Apply Even Amount of Torque
  • Maintains Propper Alignment with Barrel
  • Use with Any Barrel Nut Wrench
  • Made for Brownells USA
  • Part #080-000-637

Brownells Description:
Handy tool aids in applying straight-line torque for fast, easy installation of the barrel nut without scratching the exterior of the upper receiver. Helps ensure the right amount of torque is evenly applied, while maintaining proper alignment of the barrel, upper receiver, and gas tube ports. Use with any barrel nut wrench or free-float tube wrench and a torque wrench with a ½" square drive. Simply clamp the barrel nut wrench handle firmly in a bench vise, insert the barrel into the upper receiver, and finger tighten the barrel nut. Slide the barrel through the wrench, insert the Torque Tool in the back of the receiver until the teeth lock into the locking lugs in the barrel extension, and apply torque with the torque drive through the Tool to tighten the barrel nut. Precision machined from heavy-duty steel bar stock for years of reliable service. Available for the AR15/M16 and 308 AR.
List Price: $139.95
Price: $129.95
116.96 AUD
Add to cart

« Previous | 1 | 2 | 3 | 4 | »

Website by Webfactor Limited, Dunedin, N.Z.