We accept Visa and MasterCard
Pay by Direct Credit (NZ only)


Products List

 

Home » Reloading Stuff + » Press Parts

 Checkout

Dillon Ball-End 5/16" Hex Wrench

 

  • Dillon 5/16" Ball-End Hex Wrench
  • Add to 6 Piece Set for XL650 Press
  • Wrench is Partly Vinyl Coated to pritrect Press
  • Fits in Dillon 650 Tool Holder
List Price: $12.95
Price: $9.95
8.66 AUD
Add to cart

Dillon Ball-End Hex Wrench 6 pce Set

 

  • Dillon Ball-end Wrench Set
  • Set Contains 6 Required Hex Wrenches for Dillon Machines
  • Sizes: 3/32, 1/8, 9/64, 5/32, 3/16 & 1/4".
  • Wrenches are  Partly Vinyl Coated to Protect Machine
  • Wrenchs Fit in Dillon Tool Holder
List Price: $59.95
Price: $49.95
43.46 AUD
Add to cart

Dillon Belted Mag Powder System

 

  • Belted Mag Powder System
  • Maximum Capacity Steel Powder Bar
  • Can Dispense Up to 100gr of Extruded Powder
  • Can be Used on RL550, XL650 or AT500 Machines
  • Ideal for Large Capacity Magnum Cartridges
  • Dillon Part #97126


Image Shows Belted magnum Powder System on Toolhead and Toolhead stand.  These items are not included.

Dillon's Description:
Magnum rifle cartridges can require from 70 grains to well in excess of 100 grains for a single charge. Our new "Belted Magnum" Powder System feature a new, maximum-capacity, steel powder bar that can dispense more than 100 grains of extruded IMR powder.
Our new powder system can be used with your RL 550B, XL 650 or AT 500 reloader, and is ideal for loading large-caliber, magnum rifle cartridges. We tested this system with various extruded rifles powders and found that powder charge variations stayed within plus-or-minus three-tenths of a grain.
The "Belted Magnum" Powder System is based on our SL 900 Shot Dispenser, so the Maximum Charge Bar won't work in our standard powder measures – you'll need to buy the entire system. The good news is that the "Belted Magnum" Powder System has an integral drain, so it's easy to empty the hopper in order to change powder types; so, if you load several big calibers with various powders, it's easy to switch from one to another.
Keep plenty of extra powder on hand, because when you're dispensing 100-plus grains into every cartridge, you're gonna need it!


List Price: $299.95
Price: $269.95
234.86 AUD
Add to cart

Dillon Bullet Feeder Large Output Assembly

 

 The Output tube assembly is what connects the Mr. Bulletfeeder by DAA’s collator to the dropper. It feeds the bullets into the dropper, keeping them inline and feeding smoothly. It consists of 3 parts: 

- The collator output Tube 
- The coiled feed spring (38cm long) 
- The dropper spring cap attachment 

The Smaller output tube assembly is required when loading 9mm (over 115grs), .40 or .45.
It is included when you order a rifle caliber Mr.Bulletfeeder by DAA machine. 
List Price: $74.95
Price: $69.95
60.86 AUD
Add to cart

Dillon Bullet Feeder Small Output Assembly

 

The Output tube assembly is what connects the Mr. Bulletfeeder by DAA’s collator to the dropper. It feeds the bullets into the dropper, keeping them inline and feeding smoothly. It consists of 3 parts: 

- The collator output Tube 
- The coiled feed spring (38cm long) 
- The dropper spring cap attachment 

The Smaller output tube assembly is required for the rifle calibers (both .223 and .308) as well as when loading very short, light 9mm bullets, such as many of the 90gr bullets used. It is included when you order a rifle caliber Mr.Bulletfeeder by DAA machine. 
List Price: $74.95
Price: $69.95
60.86 AUD
Add to cart

Dillon Bullet Tray Kit

 

  • Dillon Aluminium Bullet Tray Kit
  • Mounts Directly to Dillon Strong Mount
  • Dillon Part #22214
Note: Image shows tray attached to  strong mount. This listing is for tray kit only.
List Price: $119.95
Price: $109.95
95.66 AUD
Add to cart

Dillon Caliber Conversion Kit - 550 Press

 

  • Dillon 550 Press Caliber Conversion Kit
  • Contains Shellplate, Powder Funnel & Locator Buttons
  • Comes in Plastic Storage Case

:
List Price: $99.95
Price: $98.95
86.09 AUD
Add to cart

Dillon Caliber Conversion Kit - 650 Press

 

  • Caliber Conversion Kit for XL650 Loader
  • Includes:Shellplate, Locator Buttons, Powder Funnel & Case Feed Adaptor Parts
  • Comes in  Plastic Storage Case

:
List Price: $199.95
Price: $179.95
156.56 AUD
Add to cart

« Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10... | »


Website by Webfactor Limited, Dunedin, N.Z.